The 6.4 Hemi engine is one of the most reliable engines in modern automotive history, but it can always be improved with a few modifications to get even more power out of its already impressive performance. One such modification is installing a Kenne Bell Supercharger for 6.4 hemi engines, which not only increases the horsepower and torque that your vehicle has available but also provides better fuel economy than other bolt-on superchargers.
In this article, we will discuss the benefits of installing a Kenne Bell Supercharger on a 6.4 Hemi engine and how it compares to other aftermarket supercharging options for this popular engine platform. We will also look at some of the installation tips and tricks that you need to know before attempting this project yourself so that you can get maximum performance gains from your new supercharger setup.
Finally, we’ll go over some of the common issues associated with using a Kenne Bell Supercharger on a 6.4 Hemi engine and discuss how you can avoid them for trouble-free operation. If you’re looking for an easy way to increase the power output of your 6.4 Hemi engine without sacrificing reliability or fuel efficiency, then read on!
[read more]Overview Of The 6.4 Hemi Kenne Bell Supercharger
The 6.4 HEMI Kenne Bell Supercharger is a powerful and efficient way to upgrade your car’s engine. This supercharger offers increased power, torque, and fuel economy for HEMI engines specifically. It uses an advanced belt-driven centrifugal design along with unique features like variable speed pulleys and boost control systems to optimize performance. The installation of this product is relatively easy due to its bolt-on design, making it suitable for both experienced mechanics and DIYers alike.
This supercharger kit comes complete with all the necessary components needed to install on any 5th or 6th Generation HEMI engine as well as compatible aftermarket upgrades such as air intake kits, exhaust systems, etc. With the right combination of products and parts, you can experience up to 50% more horsepower than stock when paired with other modifications like camshafts, nitrous oxide systems, etc.
One key benefit of using the 6.4 HEMI Kenne Bell Supercharger over other brands is that it requires minimal maintenance due to its superior construction quality compared to competitors in the market. Additionally, installing this supercharger also allows you access to exclusive tuning software from Kenne Bell which further enhances your vehicle’s performance capabilities without sacrificing reliability or longevity of your engine’s life span. Moving forward into advantages of the 6.4 hemi kenne bell supercharger…
Advantages Of The Kenne Bell Supercharger
Do you want to take your 6.4 hemi engine to the next level? You’re in luck because, with a kenne bell supercharger for 6.4 Hemi engines, you can do just that – and more! Get ready to experience all the advantages of this powerhouse upgrade…
When it comes to squeezing every bit of performance out of your 6.4 Hemi engine, there’s no better choice than the Kenne Bell supercharger for 6.4 Hemi engines. With its superior air-to-fuel ratio and increased boost pressure, this powerful addition is sure to make your vehicle stand out from the pack. It also offers improved power delivery throughout the RPM range, so you get maximum performance when you need it most. Plus, thanks to its unique design, installation is quick and easy – making it perfect for those who don’t have time or money to spare on complex modifications.
But that’s not all: The kenne bell supercharger for 6.4 Hemi engines also provides greater fuel economy compared to stock components due to its efficient use of compressed air technology. This means less gas station stops and more savings in your pocket! And if that wasn’t enough, this advanced system increases longevity by allowing cooler temperatures under the hood – meaning fewer trips to the shop for repairs down the road too!
TIP: If you’re looking for an edge over other drivers on the street or track then look no further than a kenne bell supercharger for 6.4 Hemi engines! With its impressive features and unbeatable performance gains, investing in one is surely a smart move – plus, it won’t break the bank either!
Installation Of The 6.4 Kenne Bell Supercharger
Installing a Kenne Bell Supercharger for 6.4 Hemi Engines is no small feat; it requires the utmost precision and attention to detail. Think of this project as a symphony in which all pieces must be perfectly tuned and orchestrated, or else you risk being met with some unpleasant consequences. The task may seem daunting at first glance, but don’t worry – we’ve got you covered!
Let’s start off by picturing ourselves on stage: each component has its own role and purpose that together create an awe-inspiring performance. To properly install your supercharger, here are three key steps that will help ensure success:
* First, remove the existing air intake system from the engine bay before installing the new components.
* Next, carefully mount the supercharger onto the engine block using custom brackets specific to your make and model of vehicle.
* Finally, attach any tubing necessary to complete the installation process (e.g., connecting hoses or fuel lines).
Once these steps have been accomplished, your 6.4 Hemi Kenne Bell Supercharger should be ready for action! With correct installation comes peace of mind knowing that everything was done correctly – now let’s explore what kind of performance benefits such a setup can bring…
Performance Benefits Of The 6.4 Hemi Kenne Bell
The 6.4 Hemi Kenne Bell Supercharger is a great choice for anyone looking to boost the performance of their engine. It provides an increase in power, torque, and efficiency that can’t be beat. Not only does it enhance your car’s overall performance, but it also reduces emissions and increases fuel economy.
One of the main advantages of this supercharger is its ability to provide instant throttle response. With this feature, you’ll get improved acceleration without any lag time or hesitation when pressing down on the gas pedal. In addition, you’ll experience increased horsepower which allows you to go faster while remaining efficient with less fuel used.
The 6.4 Hemi Kenne Bell Supercharger offers another advantage – noise reduction technology. This helps reduce engine noise while still providing powerful performance output levels; perfect if you’re after a quiet ride without sacrificing speed and power.
In short, the 6.4 Hemi Kenne bell Supercharger offers enhanced performance benefits such as superior throttle response, increased horsepower, and reduced engine noise – all at an affordable price point. Now let’s look at whether or not it is compatible with your vehicle setup…
Compatibility Of The 6.4 Hemi Supercharger
If you’re looking for the ultimate performance upgrade, then look no further than the 6.4 hemi kenne bell supercharger! This amazing piece of engineering is guaranteed to take your ride’s power and performance to new heights like never before imagined. But how compatible is this incredible system? Let’s find out!
First off, let’s talk about installation compatibility. With most vehicles on the market being eligible for a 6.4 hemi kenne bell supercharger, chances are that you’ll be able to install it with ease – making sure that all components fit perfectly without any hassle. It also comes with an easy-to-follow instructions manual so even those who have zero knowledge in engine mechanics can get their vehicle up and running quickly.
Next, there’s maintenance compatibility too! The 6.4 hemi kenne bell supercharger requires very little upkeep and servicing compared to other systems – meaning less time wasted at the mechanic trying to figure out what went wrong – plus it has been specifically designed for long-lasting durability; giving you peace of mind when driving around town or hitting the track on weekends.
With its outstanding compatibility both during installation and maintenance, as well as its unbeatable performance capabilities, it’s clear why the 6.4 hemi kenne bell supercharger continues to be one of the top choices amongst car owners today! Now let’s move onto discussing another important factor: cost…
Cost Of The 6.4 Hemi Kenne Bell Supercharger
Investing in a 6.4 hemi Kenne Bell supercharger can be beneficial for your engine, but it’s important to understand the costs involved first. The price tag on a new one can vary depending on the manufacturer and model that you choose. Additionally, there are other related expenses associated with installing and maintaining this type of system. Let’s take a closer look at what all these cost factors may include.
The initial purchase of the 6.4 hemi Kenne Bell supercharger itself is likely to be the most expensive part of the process. Depending on where you buy from, the type or use IE: off road or street, you could pay anywhere between $7,500 USD up to around $9,000 USD or more for the unit alone. It’s also possible to find used models available, although they will require careful inspection before committing to any kind of purchase agreement, as any pre-owned parts may have been previously damaged or not properly maintained over time.
In addition to buying the actual equipment, labor fees should also be taken into consideration when budgeting for installation and maintenance purposes. A professional mechanic capable of fitting and tuning a 6.4 hemi Kenne bell supercharger safely will usually charge an hourly fee which needs to be factored into overall costs too; typically ranging from $100-$200 per hour plus taxes in many areas across North America.
Overall then, estimates for total expenditure for acquisition and setup can range quite widely based upon individual circumstances – so it pays to do some research ahead of time!
Maintenance Tips For The 6.4 Kenne Bell Supercharger
Many people shy away from owning a 6.4 hemi kenne bell supercharger due to the perception that it is difficult to maintain, but with some simple precautions and regular care, this type of engine can provide reliable performance for years. Below are four tips that will help you keep your 6.4 hemi kenne bell supercharger running in top condition:
1. Change the oil regularly — typically every 3,000 miles or sooner if you notice any unusual noises while driving.
2. Check all belts and hoses periodically for signs of wear and tear, such as fraying or cracking.
3. Inspect the spark plugs routinely and replace them when needed to prevent potential misfiring issues.
4. Keep an eye on the coolant level, ensuring it remains full enough to properly protect against overheating during operation.
By following these maintenance steps and taking good care of your vehicle overall, you can enjoy trouble-free performance from your 6.4 hemi kenne bell supercharger for many years to come! Now let’s look at how to troubleshoot any problems that may arise…
How To Troubleshoot The 6.4 Hemi Kenne Bell Supercharger
Troubleshooting the 6.4 hemi kenne bell supercharger can be a daunting task, especially for those with limited knowledge of car engines and mechanics. A good starting point is to think of it like playing detective – you have to identify the problem before you can solve it. To help make this process manageable, here are four essential steps when troubleshooting your 6.4 hemi kenne bell supercharger:
First, check the basics such as battery connections, fuel pressure, and air filter condition. This step should always be done first – if any of these components are not in working order they could be causing issues with your engine’s performance. Secondly, inspect all hoses connected to the supercharger for leaks or cracks that could be letting air escape from the system and reducing its power output. Thirdly, check for vacuum leaks which will reduce boost levels significantly due to an increased amount of air entering into the intake manifold without being compressed by the supercharger’s impeller blades. Finally, review wiring diagrams and look for loose electrical connections that may need tightening up or replacing altogether.
By following these four steps, you’ll be able to diagnose many problems more effectively and efficiently than if you were guessing blindly at what was wrong with your engine. And once you know what needs fixing on your 6.4 hemi kenne bell supercharger, then you can move onto looking at some pros and cons associated with installing one on your vehicle!
Pros And Cons Of The 6.4 Hemi Kenne Bell Supercharger
The 6.4 hemi Kenne Bell Supercharger is a popular choice for those looking to boost the performance of their engine. This supercharger has its share of pros and cons that should be considered before making any upgrades. First, let’s look at some of the benefits of this product.
One major advantage of installing a 6.4 Hemi Kenne Bell Supercharger is that it can provide significant power gains over stock levels without having to make other modifications such as installing aftermarket parts or changing engine internals. The system also comes with an easy-to-follow installation guide that makes setup straightforward for experienced mechanics or do-it-yourselfers alike. In addition, users report improved throttle response and torque from the increased airflow provided by the supercharger, which puts less strain on the engine due to better combustion efficiency.
On the downside, there are also some drawbacks associated with using a 6.4 Hemi Kenne Bell Supercharger in your vehicle. For one thing, they’re typically quite expensive compared to many other options on the market; additionally, since it increases air intake significantly more than what was designed for stock engines, proper tuning is essential in order to get optimal results and avoid potential damage to components caused by running too lean or rich on fuel mixtures. Finally, because these systems require more maintenance than stock set-ups do, frequent inspection and servicing are necessary if you want them to perform reliably over time
Understanding The 6.4 Hemi Kenne Bell Supercharger
Knowledge is power; and the 6.4 hemi kenne bell supercharger is no exception. This device can provide a powerful upgrade to your engine, making it run more efficiently and with greater capacity for revving up its power output. Understanding what this device does and how it works are key in deciding whether or not you should install one on your vehicle:
First off, let’s examine the benefits of installing a 6.4 hemi kenne bell supercharger:
• Increased Horsepower & Torque – By compressing air before entering the combustion chamber, the 6.4 hemi kenne bell supercharger will increase both horsepower and torque significantly when compared to an unmodified engine setup.
• Improved Efficiency – The efficiency gains experienced by using the 6.4 hemi kenne bell supercharger are quite considerable due to improved intake flow which leads to better fuel economy as well as increased performance capabilities overall.
• Cost-Effective Upgrade – Compared to other aftermarket options available for boosting your car’s performance, investing in a 6.4 hemi kenne bell supercharger is relatively cost effective given all the benefits it provides.
On the flip side, there are also potential issues that come along with installing a 6.4 hemi kenne bell supercharger which must be taken into consideration prior to purchase:
• Heat Buildup – While heat buildup is expected from any high-performance engine modification, extreme temperatures can lead to damage if left unchecked so proper cooling systems should be installed when utilizing the 6.4 hemi kenne bell supercharger setup on your vehicle.
• Maintenance Requirements – The additional level of maintenance required for keeping a 6.4 hemi kenne bell supercharger running optimally cannot be overlooked as regular oil changes and cleaning/inspection of parts may be necessary depending upon usage conditions encountered while driving around town or at race tracks across America!
In light of these pros and cons, evaluating what type of setup best meets your needs becomes paramount when considering upgrading your ride with a 6.4 hemi kenne bell supercharger device—especially since potential issues such as heat buildup or maintenance requirements could end up costing you time and money in the long run if not addressed properly upfront…
Potential Issues With The 6.4 Hemi Kenne Bell Supercharger
Have you ever wondered what the potential issues are with a 6.4 hemi kenne bell supercharger? As an enthusiast of any type of high-performance vehicle, it’s important to understand all aspects of the engine and its components — including the risks that come along with them. In this article, we’ll take a look at some common problems associated with the 6.4 hemi kenne bell supercharger as well as how they can be minimized or avoided altogether.
The most common issue reported with the 6.4 hemi kenne bell supercharger is overheating due to too much boost pressure from the blower itself. This can cause damage to other engine parts like valves, pistons, and bearings because of excessive heat buildup in the cylinders. Additionally, running too rich or lean on fuel mixtures can also create extra stress on your engine. The proper tuning of your ECU is essential for optimal performance and longevity when using a kenne bell supercharger system.
It’s also important to keep up with regular maintenance on your engine before installing a kenne bell supercharger kit. Faulty sensors, plugs, wires, gaskets etc., can all lead to additional problems once installed and tuned properly. If these items aren’t working correctly beforehand then adding more power won’t help matters either – so make sure everything is checked over before installation!
In order to get the best results possible out of your 6.4 hemi kenne bell supercharger setup, it’s crucial to consider all potential issues that may arise during operation and address them accordingly ahead of time. Ensuring proper maintenance schedules are kept up and taking care not to push outside limits set by manufacturers will ensure long-term reliability while maximizing output from your system safely and efficiently.
How To Maximize The Potential Of The 6.4 Hemi Kenne Bell Supercharger
The 6.4 hemi kenne bell supercharger is an exciting engine upgrade, providing a massive power boost to any vehicle it’s installed in. But with such potential comes the need for proper maintenance and upgrades if you want to ensure your car gets the full benefit of this powerful piece of equipment. To maximize its potential, there are several things that should be taken into consideration:
• Keep up with routine maintenance – Regular oil changes, filter replacements, and coolant flushes can help keep your engine running at peak performance.
• Upgrade components when necessary – As time goes on, some parts may need to be replaced or upgraded in order to take full advantage of the kenne bell supercharger’s capabilities.
• Monitor air intake temperatures – Keeping an eye on air intake temperatures will help prevent overheating which can cause long-term damage to the engine.
• Invest in additional tuning technologies – Adding aftermarket controllers or other software tweaks can make sure your engine is getting optimal performance from your kenne bell supercharger setup.
By following these steps and staying ahead of any potential issues, you’ll get the most out of your 6.4 hemi kenne bell supercharger installation without putting undue strain on your car’s engine. With all this knowledge under their belt, drivers now have one more tool they can use to get even more out of their vehicles’ engines – aftermarket options for the 6.4 hemi kenne bell supercharger…
Aftermarket Options For The 6.4 Hemi Kenne Bell Supercharger
Like a proud parent watching its child take flight, the 6.4 hemi kenne bell supercharger is ready to soar with aftermarket options. With countless potential upgrades available under the hood, this impressive piece of machinery is just itching for some modification. Whether it’s new spark plugs or an upgraded intake manifold, there are plenty of ways to bring out the best in the engine and maximize performance on the road.
The most common modifications include replacing stock parts with those designed specifically for high-performance engines. While these can be expensive, they have been proven time and again to provide better results than their generic counterparts. Additionally, certain accessories like boost controllers can help fine-tune settings while providing more precise control over output levels. Finally, investing in quality fuel injectors also pays dividends when looking to squeeze every last ounce of power from the 6.4 hemi kenne bell supercharger setup.
All that said, it’s important to remember that not all components will work well together; finding a good balance between cost and performance requires careful research and consideration before making any purchases. The key lies in understanding what works best for your particular vehicle model and taking into account how much you’re willing to spend overall on modifications–but rest assured that whatever path you choose will certainly result in improved driving dynamics and an enhanced sense of satisfaction behind the wheel!
Common Questions About The 6.4 Hemi Kenne Bell Supercharger
The 6.4 hemi kenne bell supercharger is a popular aftermarket upgrade for those looking to boost their engine’s performance. But there are a lot of questions out there about the product, from its installation process to the maintenance it requires. Let’s take a look at some common queries regarding this upgrade:
1) How easy is it to install? Installing the 6.4 hemi kenne bell supercharger can be done in your own garage with basic tools and knowledge of how engines work. It generally takes between four and six hours depending on the experience level of the installer.
2) What kind of power gains should I expect? This will depend largely on what other modifications have already been made to the vehicle, but most drivers report an increase of 50-150 horsepower once installation is complete.
3) Is extra tuning required? Yes, fine tuning may be necessary following installation in order to get optimal performance levels from your new supercharger. Experienced tuners will be able to find that sweet spot easily enough though, so no need to worry too much!
4) Does it require regular maintenance? The 6.4 hemi kenne bell supercharger does not require any more frequent servicing than normal engine components do – just make sure you keep up with regularly scheduled oil changes and tune ups as usual! With proper care, you’ll get years of reliable performance from your upgraded ride.
Given all this information, it’s easy to see why many car owners opt for the 6.4 hemi kenne bell supercharger when they’re looking for an aftermarket option for their HEMI engine – now let’s explore what alternatives exist if this isn’t quite the right fit…
Alternatives To The 6.4 Hemi Kenne Bell Supercharger
The 6.4 hemi kenne bell supercharger is a popular choice for those who want to increase the performance of their engine, but it isn’t always suitable or within every budget. If you’re looking at alternatives, here are some ideas that might just fit the bill!
For starters, there’s the Whipple Supercharger – a top-of-the-range option that promises maximum power with minimal effort. It’ll cost more than the Kennel Bell, sure, but if money’s no object then this could be worth considering. A bit closer to home price-wise is an E-Force Supercharger from Edelbrock; these will give you similar results as the Whipple and still come in cheaper than its competitor.
You don’t have to go down the forced induction route though; cold air intake kits can provide noticeable gains without breaking the bank. Sure, they won’t offer anything like what a supercharger does – but if you’re on a tight budget or only after minor improvements then these are definitely worth exploring! TIP: Talk to your local auto shop about your specific needs – they may be able to recommend something tailored specifically to your vehicle and requirements.
Frequently Asked Questions
How Much Horsepower Does The Hemi Kenne Bell Provide?
Power is the ultimate goal of any engine upgrade – and with the 6.4 hemi Kenne Bell Supercharger, you’ll get that in spades. This anachronistic means of harnessing more horsepower has stood the test of time since its inception in 1979, providing a modern-day solution to an age-old problem.
This supercharger provides up to 150hp gain over stock power levels, allowing your engine to really roar! It’s designed for maximum efficiency using patented twin screw technology, so you won’t have to worry about sacrificing fuel economy or reliability. Plus, installation is relatively simple compared to other forced induction systems available on the market today.
So if you’re looking for a way to take your ride from mild mannered sedan to muscle car monster then look no further than the 6.4 hemi Kenne Bell Supercharger! With its incredible performance capabilities and easy installation process, it’s sure to make all your automotive dreams come true.
What Is The Warranty On The 6.4 Hemi Supercharger?
The roar of the engine, amplified by a supercharger, is music to any enthusiast’s ears. The raw power and speed that it provides is why many car owners choose this upgrade for their vehicle. But with such an important purchase, one needs to know about its warranty before taking the plunge: the 6.4 Hemi Kenne Bell Supercharger comes with a three year limited warranty from manufacturer defects.
For those looking for peace of mind when investing in this aftermarket part, they can rest assured knowing that their investment will be covered if anything goes wrong due to manufacturing issues within three years of purchase. With this kind of protection, you can focus more on enjoying your ride rather than worrying about repair costs down the line.
This coverage also acts as assurance that only genuine parts are being used – something which is especially important given how much money people tend to invest into these types of upgrades. After all, no one wants subpar performance or reliability from their prized possession, so having confidence in what’s installed under the hood is essential.
By understanding the terms and conditions surrounding the product warranty beforehand, owners can get maximum enjoyment out of their vehicles without fear of potential malfunctions caused by factory-level deficiencies.
Is The 6.4 Hemi Kenne Bell Supercharger Emissions Compliant?
The 6.4 hemi kenne bell supercharger is a popular and powerful addition to many vehicles, but one of the primary concerns for any driver is making sure their vehicle remains emissions compliant. This often means ensuring that aftermarket modifications meet certain standards set by governing bodies in order to protect air quality. In this case, it’s important to understand how the 6.4 hemi kenne bell supercharger fares when it comes to meeting those requirements.
When looking at the 6.4 hemi kenne bell supercharger specifically, there are several factors that should be taken into consideration when determining whether or not the device meets emissions compliance standards. These include looking at the amount of pollutants emitted from the engine and seeing if they fall within acceptable parameters as well as examining other parts of the system such as fuel delivery, exhaust systems, and catalytic converters which can all play a role in how efficient an engine runs when using a supercharger like this one.
Fortunately, with proper installation and maintenance, drivers who choose to add a 6.4 hemi kenne bell supercharger can rest assured knowing that it should not present any issues regarding emissions compliance so long as all related elements are up-to-date and functioning correctly. Knowing what kind of performance gains you’ll get while also having peace of mind about your vehicle’s safety levels is invaluable – so don’t hesitate to check out what this great piece of equipment has to offer!
How Long Does It Take To Install The 6.4 Hemi Kenne Bell?
It is no secret that the 6.4 hemi kenne bell supercharger offers impressive performance, but what about installation time? To answer this question, let’s take a closer look at the process of installing such an important component to your engine.
First and foremost, we must understand how long it takes to install the 6.4 hemi kenne bell supercharger:
1) Disconnecting the factory air intake system;
2) Installing the intercooler pump and reservoir;
3) Connecting all necessary hoses and wiring harnesses;
4) Finalizing any other components needed for complete operation.
In essence, these four steps need to be completed in order to properly install this type of supercharger on your vehicle.
Although each job may vary slightly depending on skill level or shop amenities, most estimates range from 3-6 hours total labor time – making it a relatively quick upgrade compared to other modifications available for 6.4 hemi engines. Furthermore, those with experience can expect even faster completion times due to their familiarity with the specific parts involved in the process. Ultimately, you should always consult with a professional mechanic if you are considering adding one of these powerful upgrades to your ride.
So whether you’re looking for more power or just want something different under the hood, investing in a kenne bell supercharger for your 6.4 hemi can provide both convenience and satisfaction when done right!
Does The Hemi Kenne Bell Supercharger Require Any Additional Modifications?
The 6.4 Hemi Kenne Bell Supercharger is a powerful and efficient piece of equipment, capable of boosting the performance of any engine it’s attached to. But before you can start enjoying its benefits, there are some important considerations to make – namely whether or not additional modifications will be required for installation.
In many cases, the supercharger can simply bolt onto existing components without needing further changes. However, depending on how your engine has been built and modified, extra work may need to be done in order for the supercharger to fit properly. This could include changing out certain parts such as exhaust manifolds or headers, or even making adjustments to the intake manifold itself.
For those looking to get their hands on this impressive upgrade, it’s important to take these potential requirements into account beforehand. Be sure to research what type of modifications might need to be made based on your particular vehicle’s setup so that you know exactly what kind of work needs to be done prior to installation.
Conclusion
In conclusion, the Kenne Bell Supercharger for 6.4 Hemi engines is a reliable and powerful upgrade that will enhance the performance of any vehicle with this engine type. The supercharger can provide up to 150 horsepower, making it an ideal choice for those looking to dramatically improve their car’s power output. Furthermore, the warranty offered by Kenne Bell covers all parts of the system should anything go wrong during installation or operation over time. Emissions compliance is another important factor worth considering when installing this product; luckily, Kenne Bell has taken care to ensure that its products are compliant in most states across America. Installation also happens quickly as no additional modifications are necessary; users simply need to make sure they have access to basic tools and follow instructions correctly. All things considered, upgrading your 6.4 Hemi engine with a Kenne Bell Supercharger is truly a wise investment that will pay dividends in terms of increased performance down the line. To put it succinctly: if you’re looking for something special under the hood, look no further than the cutting-edge technology provided by Kenne Bell – you won’t be disappointed!
Dodge Ram supercharger, what you need to know, different versions of the Dodge Ram, the different supercharger kits, engine options, and more. If you have a 2014 to 2019 6.4L Hemi Dodge Ram, you’ll want to see the 2015 Ram 2500 6.4 Hemi Supercharger article too.
Wondering if a Hellcat supercharger will fit on to a 6.4 Hemi? Well. . . . the answer is yes! You’ll also learn how much more power you could potentially make, the total cost of a kit, if it’s compatible with other hemi engines and more. Find out more here Mopar Supercharger For 6.4 Hemi Engines
[/read]